BEI Encoder Accessories

Home

Products

Contact

Sitemap

Accessories (Accessories PDF 1 pg/51k)

return to Main Product page

POWER SUPPLY for Encoders and Controllers

The small footprint of this DIN Rail-mountable power supply makes it easy to fit into small enclosures. With a wide range of acceptable input voltages, both AC and DC, it's usable in virtually all industrial applications worldwide.

Order BEI P/N 924-60008-001 for 5V
or BEI P/N 924-60008-002 for 24V
Power Supply Specifications PDF (2 pgs/155k)

CABLE

for INCREMENTAL ENCODERS
Cable Length	BEI Part No.
100 Feet	924-37048-003-100
500 Feet	924-37048-003-500

for ABSOLUTE ENCODERS
Cable Length	BEI Part No.
100 Feet	924-37063-100

CABLE ASSEMBLIES

for INCREMENTAL ENCODERS
M12 Cable Assembly MS3106		M14 Cable Assembly MS3106F14S-6S		M16 Cable Assembly MS3106F16-1S		M18 Cable Assembly MS3106F18-1S
Cable Length	BEI Part No.	Cable Length	BEI Part No.	Cable Length	BEI Part No.	Cable Length	BEI Part No.
10 Feet	924-31186-1210	10 Feet	924-31186-1410	10 Feet	924-31186-1610	10 Feet	924-31186-1810
20 Feet	924-31186-1220	20 Feet	924-31186-1420	20 Feet	924-31186-1620	20 Feet	924-31186-1820
30 Feet	924-31186-1230	30 Feet	924-31186-1430	30 Feet	924-31186-1630	30 Feet	924-31186-1830
						50 Feet	924-31186-1850

for 8-Bit ABSOLUTE ENCODERS
MS3106F20-29S
Cable Length	BEI Part No.
10 Feet	924-31204-2010
20 Feet	924-31204-2020
30 Feet	924-31204-2030

for 12-Bit ABSOLUTE ENCODERS
MS3116F14-19S
Cable Length	BEI Part No.
10 Feet	924-31219-1410
20 Feet	924-31219-1420
30 Feet	924-31219-1430
50 Feet	924-31219-1450

MATING CONNECTORS

MS3106 - for INCREMENTAL ENCODERS
Shell Size	Used with	L Max	# of Pins	BEI Part No.
M14	EM14 or SM14	2.125"	6	MS3106F14S-6S
M16	EM16 or SM16	2.187"	7	MS3106F16S-1S
M18	EM18 or SM18	2.656"	10	MS3106F18-1S
M20	EM20 or SM20	2.656"	17	MS3106F20-29S

MS3116 - for ABSOLUTE ENCODERS
Shell Size	Used with	L Max	# of Pins	BEI Part No.
M14	SM14/19 or EM14/19	1.800"	19	MS3116J14-19S
M16	SM16/26 or EM16/26	2.047"	26	MS3116F16-26S
M18	SM18/32 or EM18/32	47mm	32	MS3116F18-32S

SYNCHRO-CLAMPS

Grip "C"	Encoder Type	BEI Part No. (3-Piece Kit)
.093	H25E or H20E	924-31165-001
.125	H25G	924-31165-002

COUPLINGS

Encoder Coupling

BEI Part No.	Bore Dia +.002/-.000		Torsional Flexibility	Torques (I B-Inch)
BEI Part No.	A1 Dia	A2 Dia	Torsional Flexibility	Non-Reversing	Shock or Reversing	Momentary
39074-8-8	.250	.250	.165 min/in-oz	19	9.3	37
39074-12-8	.375	.250	.315 min/in-oz	15	7.5	30
39074-12-12	.375	.375	.315 min/in-oz	15	7.5	30

Notes on Couplings:
1. Bore is relieved to allow shafts to nearly butt.
2. Setscrews: Cup point, hex socket, #6-32. Two at each end, 90° apart.
3. Permitted axial motion from free length: ± .020.
4. Permissible shaft alignment: Angular up to 5° Parallel up to .010"

Installation Note:
To avoid coupling failure, be sure the shafts fit freely in the coupling bores and that the coupling is not compressed or subjected to greater deflections than specified above.

MEASURING WHEEL

This measuring wheel has a 12-inch circumference, aluminum hub and a high-durometer polyurethane rim. It attaches to a standard 3/8 inch shaft with dual set screws at 90 degrees.

Order BEI P/N 31196-001

PROTECTIVE HOUSING for Hollow Shaft Encoders

This cage is designed to protect hollow-shaft encoders from mechanical damage during handling and installation. For use with either the HS25 or the HS35 encoder, it has a side cutout to allow for tether arm placement. Installation hardware included.

Order BEI P/N 26068-001.
Outline Dimensions, PDF

We Accept

BEI Encoders • Optical Encoders & Linear Encoders • 1-800-ENCODER (362-6337) • Rugged Optical Encoders for Harsh Environments • Stainless Steel and Sealed Encoders